Imported Vintage Wood
Request for a Catalog
Story of Vintage Wood
Reclaimed Solid Wooden Flooring
Flooring =North America=
This vintage wood flooring is made of reclaimed wood from100-year-old constructions and classified by wood species of each beam. It is also cut into board and put planar technology on the surface that is processed along the longer direction. Since it is non-painting, you can work on finishing as you like. The bug holes, nail holes, and cracks of those days make this old lumber more attractive which you can hardly see them on new flooring. It is a 100% solid wood.
-
Rustic Pine (FL-RP)
This flooring has saw mark and stain still remained on the surface. Its various texture and appearance makes it more authentic and reminds us of those days.
Wood Species: Pine Size: Thickness 20mm×Surface Width 160mm and 215mm×Length Approximately 450-4,200mm Painting: Non-painted. There are nail holes, cracks, and knots marks on the surface. Processing:Tongue and Groove processed on the longer direction < Without T&G on the shorter direction> -
Heritage Oak (FL-HO)
This oak material is from Appalachian Mountains in eastern North America and used to be a part of construction materials for a long time. It is also other than easy to install on walls too.
wood Species: Oak Size: Thickness 12mm×Surface Width 114mm ×Length Approximately 400-2,400mm Painting:Non-painted Processing: The longer direction with Tongue and Groove processing. The shorter direction without T&G(Butt-Joint).Processed smooth surface. -
Heritage Pine (FL-HTP)
This old pine from the East coast of the United State. The special feature is a circular saw mark left on the surface from that time. It is easy to install on walls too.
Wood Species: Southern yellow pine Size: Thickness 12mm×Working Width 114mm ×Length Approximately 400-2,400mm Painting: Non-painted Processing: The longer direction with Tongue and Groove processed. The shorter direction without T&G(Butt-Joint). Processed smooth surface. -
Oak Round Edge (FL-ORE)
This oak lumber is beveled edge of board. When you put it on a floor, you will see fine unevenness shown up.
Tree Species: Oak Size: Thickness 19mm×Working Width 114mm ×Length Approximately 400-2,400mm Painting:Non-painted Processing: T&G processed only on the longer direction. The shorter direction without T&G. -
Cigarette Pine・Round Edge (FL-CPRE)
The material is southern yellow pine which is dug from a warehouse where leaves of cigarette(tobacco/cigar) were stored. The edge part is rounded and its surface is smooth and can be used for housing as well.
Wood Species: Southern yellow pine Size: Thickness 19mm×Working Width 100mm×Length Approximately 400-2,400mm Painting: Non-painted Processing: T&G processed only on the longer direction. The shorter direction without T&G. -
Old・Cottage Pine (FL-OCP)
Vintage wood made of pine has relatively short history (about 80-100 years) and is thinner. On the surface of flooring, there are various textures including stains, scratch and knothole marks, nail holes.
Wood Species: Pine Size: Thickness 17mm×Working Width 107mm ×Length Approximately 450-3,500mm Painting:Non-painted. There are stain, scratch and knothole marks on the surface. Processing: T&G processed only on the longer direction. The shorter direction without T&G. -
Paint・Cottage Pine (FL-PCP)
Vintage wood made from pine has relatively short history. (About 80-100 years), so it is thinner. The white painting has still been remained on the surface and there are some non-painted dots about every 1,200mm.
Wood Species: Pine Size: Thickness 17mm×Working Width 107mm×Length Approximately 450-3,500mm Painting: Non-painted. There are white paints, nail hole, scratch and knot marks remained on the surface. Processing: T&G processed only on the longer direction. The shorter direction without T&G. -
Chestnut Oak (FL-CO)
It is a flooring that has been processed from a beam of chestnut reclaimed from 80-100 year-old architectural oak. Saw mark, knothole and nail holes are its unique feature.
Tree Species: Chestnut oak Size: Thickness 20mm×Working Width 103mm ×Length Approximately 600-2,500mm Painting: Non-painted Processing: T&G processed only on the longer direction. The shorter direction without T&G. -
Lexington Pine (FL-LP)
It is a flooring that has been processed with a beam of 80-100 year-old architectural pine. Saw tooth, knothole and nail hole are its special feature
Wood Species: Pine Size: Thickness 20mm×Working Width 103mm×Length Approximately 600-2,500mm Painting: Non-painted Processing: T&G processed only on the longer direction. The shorter direction without T&G. -
Elm (FL-ELM)
Wood Species: ELM Size: Thickness 20mm×Working Width Approximately 190mm×Length Approximately 450-4,800mm Painting: Non-painted Processing: T&G processed only on the longer direction. The shorter direction without T&G. -
Beech (FL-BC)
This elm flooring is only available from vintage lumber. The warm grains of this old wood gives a sense of luxury. This is a vintage lumber flooring with fine grain and gives a sense of nostalgic and luxurious feel.
Wood Species: Beech Size: Thickness 20mm×Working Width 190mm× Length Approximately 450-4,800mm Painting: Non-painted. There are nail holes, scratch and knot marks on the surface. Processing: Tongue and Groove processed only on the longer direction. The shorter direction without T&G. -
Natural Flooring・Hard Wood Mixed (FL-HWM)
It is a vintage lumber mixed with valuable hard wood of eastern coast of North America.
Wood Species: Hickory, Ash, Maple, Birch, Beech, Elm, Poplar, and Oak Size: Thickness Approximately 19mm×Working Width 101mm×Length Approximately 400-2,400mm Painting: Non-painted Processing: Tongue and Groove processed only on the longer direction. The shorter direction without T&G (Butt-Joint). -
Natural Flooring・Heart Pine Wide Size (FL-HPW)
It is reprocessed from valuable and wide heart pine old lumber.
Wood Species: Heart Pine Size: Thickness Approximately 19mm×Working Width 290mm×Length Approximately 450-3,800mm Painting: Non-painted Processing: Tongue and Groove processed only on the longer direction. The shorter direction without T&G (Butt-Joint). -
Antique Flooring (FL-AT)
This wooden flooring has various texture and appearances, and some small cracks, nail holes and some part of cracking knots are one if its unique characters. Antique flooring expresses the character of wood product for itself. It is also sophisticated and has flexibility.
*The one in this picture has put cheek colored stain and urethane coating on the non-coating wooden flooring.
Wood Species: Douglas fir(Made in Canada) Size: Thickness 18mm×Working Width 210mm×Length Approximately 609-2,437mm Painting: Non-painted You can still see some nail holes, saw mark and roughness on the surface. Processing: Tongue and Groove processed on the longer direction with four sides chamfered (the shorter direction without T&G).
Flooring =Europe=
This vintage wood flooring is made of reclaimed lumber from100-year-old constructions and classified by wood species of each beam. It is also cut into plank and put planar technology on the surface that is processed along the longer direction. Since it is non-painting, you can work on finishing as you like. The insect holes, nail holes, and cracks of those days make this old lumber more attractive which you can hardly see them on new flooring. It is a 100% solid wood.
-
Herringbone (FL-HB)
Herringbone that used to be laid on old construction in Europe was peeled carefully and adjusted thickness by back planer. You can enjoy a variety appearance and texture depending on how you put them on.
Wood Species: Oak Size: Thickness Approximately 5-15mm×Width Approximately 50-60mm×Length Approximately 298mm Painting: Non-painted Processing: Without T&G -
Mahogany (FL-MHG)
This flooring is reprocessed from Filipino mahogany that was delivered to Europe to be used as deck materials for ships and trains few decades ago. You can install it on walls to make good use of dotted bolt holes.
Wood Species: Type of old Pilipino Mahogany Size: Thickness 19mm×Width 165mm×Length Approximately 2,630-2,640mm Painting: Non-painted Processing: Tongue and Groove processed on four directions